Skip to main content
Australian Climate Systems

Heating & cooling advice

Your questions.
Expert answers.

Explore our frequently asked questions for the answers to all our most common heating and cooling enquiries.

FAQs
30 years in business
6 years workmanship guarantee
Qualified & trained technicians

Practical guidance

Make the most
of your system.

Have a question about your own home or system? Our team can help.

Ask our team
How many vents can I close on my heating?

It will depend on the model and size of the heating system you have installed at your home. With the introduction of adaptive zoning, it is possible to operate heating in specific areas of your home. Please contact us for more information.

Can I close any vents on my evaporative cooler?

No – Evaporative cooling systems need to operate with all vents open. Closing vents can be detrimental to its operation and cause humidity within the home. This can lead to ruined furniture and floors that become slippery and dangerous.

Can I get add-on cooling for my existing gas ducted heating system?

Only when your existing heating system has been designed to do so. This is critical as these systems will not cool properly and be expensive to run otherwise. Larger and higher insulated ducting is required when add-on cooling is attached to a gas ducted heating system.

Is ceiling heating effective?

Yes! Ceiling heating systems are a growing requirement in residential homes across Australia. Australian Climate Systems can design the system to blow the air down to floor level and install the return air at low level.

Can my evaporative cooler and gas ducted heating system operate through the same ducts?

No – Unfortunately, evaporative cooling needs a much greater volume of air. The ducting for evaporative cooling is much larger than that of gas ducted heating.

Can I install and service my heating or cooling system myself?

No – not unless you are a licensed plumber, electrician or both depending on what system you have. Licensed tradespeople will ensure you keep all manufacturer warranties by supplying you with a compliance certificate after the installation.

Can I get a remote controller for my system?

Yes – Australian Climate Systems can supply you with a heater or cooler that can be operated via a remote. Please talk to our consultant at the time of the quote as it is dependent on what type of system you install.

How long does the installation process take?

One day – Most installations are completed within a day. Australian Climate Systems will inform you of the time frame when we are scheduling your job for installation.

Do I need to open doors and windows when operating my evaporative cooler?

Yes! Doors or windows must be open as evaporative cooling systems operate via airflow. This is a critical part of operating your evaporative cooler.

How much water does an evaporative cooler use?

This will depend on the humidity level on the day of operation. Higher humidity will have a direct impact on the evaporation rate of water over the pads. The size of the cooler and the speed of the fan will also change your consumption. Evaporative cooling is the cheapest and healthiest form of cooling for your home.

Does an evaporative cooler work on humid days?

Melbourne normally has the ideal weather conditions to operate evaporative cooling, however, the dryer the day the better the system will work.

Can I get a cooling only split system?

Yes – However, quite often there is only a marginal cost difference to install a reverse cycle (heating and cooling) system.

What does split system mean?

Split system does not mean heating and cooling. It relates to the air conditioning unit being split into two parts (indoor head and outdoor compressor).

What brand is best?

Daikin has a great reputation in the market as a quality product. Australian Climate Systems are dealers for Daikin, Panasonic and ActronAir. We believe every house and room is different and will recommend the best unit for your home.

BRIVIS RESET NETWORKER CONTROLLER – Fault code and reset

Reset when the unit is not working – Press FN then 1 to get an error code. Press FN then 1 then 4 to reset the controller

https://www.youtube.com/watch?v=WERcaV5Gv_0

BRIVIS NETWORKER CONTROLLER – Hard reset when black lines or boxes appear at top of the screen

You will need to remove the controller from the wall. Please see the video below.

https://www.youtube.com/watch?v=3Pz4k1_x5-M

Talk to our team

Here to help.
Every step of the way.

Tell us about your heating or cooling needs, or ask our team a question.

03 9726 4444

GET A FREE QUOTE

Tell us about your heating and cooling needs.

Choose a service first to see the relevant system options.

We use your details to respond to your enquiry. Privacy policy.